If your touchscreen car stereo is not working, don’t worry! You are not alone. Many people have this problem and there is a solution.
A few months ago my touchscreen car stereo stopped working properly. Every time I would try to change the song or adjust the volume, nothing would happen. It was really starting to get on my nerves.
I know it’s the worst experience for everyone, but there is a way to fix this issue.
In short, to fix a touchscreen car stereo, first clean the touch screen with a soft, dry cloth. Then, use a cotton swab dipped in isopropyl alcohol to clean the screen. If the screen is still unresponsive, you can try the other methods below in this article maybe they work for you.
There are a lot of different ways to go about fixing your touchscreen car stereo – some people recommend rebooting the stereo, and others say that you can just clean the touchscreen yourself if you have the right tools.
Now let’s explore some other ways, but before let’s talk about the problem and its reasons.
What Are Some Common Problems Of Touch Screen Car Stereo?
Here are some of the most common problems:
The Screen Is Unresponsive
The first problem that people have with their touch screen car stereos is that the screen is unresponsive.
This means that when they try to touch the screen, nothing happens. Here is a reason.
The most common reason why your touch screen might be unresponsive is because of the software that runs the stereo. If there is a software error, it can cause the touch screen to be unresponsive. This error can happen if you install a new piece of software on the stereo or if you upgrade the software.
There Are Scratches On The Screen
Another problem that people have with their touchscreen car stereos is that there are scratches on the screen.
This can happen if you use a sharp object on the screen or if you accidentally drop the stereo.
The Touchscreen Is Cracked
The fourth problem that people have with their touchscreen car stereos is the touchscreen is cracked. The reason is if you drop the stereo or if it gets hit by something.
These are 4 of the most common problems that people have with their touchscreen car stereos. If you have one of these problems, then stay tuned because I will show you how to fix them!
How To Fix A Touch Screen Car Stereo | 4 Methods
Now that you know the most common problems it’s time to fix them, touch screen car stereos are not too difficult to fix.
Step 1. Rebooting The Stereo From Scratch
The first method to try when troubleshooting your touchscreen car stereo is to reboot the stereo.
This can be done by unplugging the power cord from the back of the stereo and then plugging it back in. Once the stereo has been plugged back in, turn it on and see if the problem has been fixed.
Step 2. Fixing The Wiring
The second method to try when troubleshooting your touchscreen car stereo is to fix the wiring.
First, check all of the connections between the stereo and the car’s electrical system. Make sure that all of the wires are securely connected and that there are no loose or damaged wires.
Step 3. Clean The Touchscreen Correctly
The third method to try when troubleshooting your touchscreen car stereo is to clean the touchscreen.
To clean it use a soft, dry cloth to wipe down the touchscreen. Make sure that you do not use any harsh chemicals or cleaners on the touchscreen as this could damage it.
Step 4. Perform A Clean Factory Reset Option
The fourth and final method to try when troubleshooting your touchscreen car stereo is to perform a clean factory reset.
First, go into the settings menu of the stereo and select the option to reset all of the settings. This will erase all of the customizations that you have made to the stereo and return it to its default state.
These are 4 methods that you can try when troubleshooting your touchscreen car stereo.
Guide On How To Replace Or Fix A Broken Touch Screen Car Stereo
Here are some steps to take to fix or replace a broken touchscreen car stereo.
Step 1. Remove The Car Stereo System
The first step is to remove the car stereo from the dashboard. You will need a screwdriver to remove the screws that hold the stereo in place.
Once you have removed the screws, carefully pull the stereo out of the dash.
Step 2. Disassemble The Car Stereo System
The next step is to disassemble the car stereo. This will involve removing the faceplate, detaching the wires, and removing the touchscreen.
Use a Phillips head screwdriver to remove the screws that hold these components in place.
Step 3. Remove The Screen Panel’s Central Wires
Once you have removed the faceplate and detached the wires, you will need to detach the main wires of the screen panel.
These are usually located at the top of the screen panel. Use a pair of needle-nose pliers to carefully disconnect these wires.
Step 4. Remove The Touchscreen From The Car
The next step is to disconnect the touchscreen from the car stereo. This will usually be located at the bottom of the screen panel. Use a pair of needle-nose pliers to carefully disconnect these wires.
Step 5. Remove The Shattered Touchscreen
Once you have disconnected the touchscreen, you can remove the broken touchscreen from the car stereo.
Be careful not to damage the LCD screen when removing the broken touchscreen.
Step 6. Take Off The Lcd Screen And Clean It
The next step is to clean the LCD screen on the car stereo. You can use a soft cloth and some distilled water to gently clean the screen. Make sure to dry the screen completely before proceeding to the next step.
Step 7. Install The New Touchscreen
The next step is to install the new touchscreen. You will need to connect the new touchscreen to the car stereo using the same wires that you disconnected in Step 4.
Step 8. Use A Screen Protector
The final step is to add a screen protector to the new touchscreen. This will help protect the touchscreen from scratches and other damage.
Reassemble everything carefully following these steps in reverse order and your touchscreen car stereo should be as good as new!
How To Prevent Touch Screen Car Stereo From Damaging Again?
Here are some tips and tricks.
- Do not use any sharp objects on the touchscreen. This includes fingernails, keys, and other pointy objects.
- Avoid using any harsh chemicals or cleaners on the touchscreen. This includes window cleaner, alcohol, and other cleaning solutions.
- Do not place anything heavy on top of the touchscreen. This can include books, laptops, and other heavy objects.
- Be careful not to drop the touchscreen. This can cause the screen to shatter or crack.
- Do not press too hard on the touchscreen. This can damage the screen over time.
- If the touchscreen is not responding properly, give it a light tap with your finger. Do not use excessive force when tapping the screen.
- Keep the touchscreen clean and free of fingerprints. You can use a soft cloth and some distilled water to gently clean the screen. Be sure to dry the screen completely before proceeding.
With these tips, you can keep your touch screen in good condition and avoid having to replace it in the future.
I hope that this article was helpful in giving you a starting point about, how to fix a touchscreen car stereo.
There are many potential problems that can arise with these devices, but hopefully, the tips and tricks I’ve outlined here will help get you back on the road with tunes blasting in no time.
Is it possible to repair a touchscreen car stereo myself, or do I need to take it to a professional?
Yes, It’s possible to repair a touchscreen car stereo yourself with the right tools and instructions.
However, if you are not comfortable working with electronics, it is best to take it to a professional.
How do I know if my touchscreen car stereo is broken?
If your touchscreen car stereo is not responding to touch, or the touchscreen is cracked or shattered, then it is likely broken and will need to be replaced.
If I break my touchscreen, can it be repaired or replaced?
Yes, most touch screens can be repaired or replaced. However, the cost of replacement will vary depending on the make and model of your car stereo.
Have a nice day!