7 Steps How To Install Speakers In Car Trunk?

Installing speakers in your car’s trunk can be a daunting task, especially if you’re not familiar with the process. 

It’s important to have good quality sound when driving, and installing new speakers can be the perfect way to achieve that. However, many people are hesitant to try it themselves for fear of making a mistake. 

I’m here to help! In this article, I’ll walk you through the entire process of how to install speakers in car trunk. Plus, I’ll also provide tips on what tools to use and how to avoid common mistakes.

Keep reading to find out more!

Tools Required For Installing Speakers In Car Trunk

Here are the 10 tools you’ll need to install your new car trunk speakers:

  • Drill
  • 3/4″ hole saw or spade bit
  • Jigsaw
  • Wire strippers
  • Electrical tape
  • Screwdriver
  • Rags or old towels
  • Silicone sealant
  • Level
  • Tape measure
  • Panel removal tool

How To Install Speakers In Car Trunk?

Car speakers are one of the most important parts of a sound system. They provide the majority of the sound, and as such, need to be installed correctly. Here are 7 steps on how to do just that:

You might be interested in Top 10 Best 6.5 Component Speakers For Bass

1. Measure The Space

Before you even think about buying speakers, you need to know how much space you have to work with.

Measure the area of the trunk where you want to mount the speakers in. Make sure to leave enough space around the speaker for proper sound dispersion.

2. Pick Your Speakers

Now that you know how much space you have, it’s time to pick out your new speakers! There are a few things to consider when making your selection:

  • Size: Make sure the speaker is small enough to fit in the area you measured.
  • Power Handling: Choose a speaker that can handle the amount of power your amplifier can deliver.
  • Frequency Response: You’ll want a speaker that can reproduce a wide range of frequencies.
  • Sensitivity: A higher sensitivity rating means the speaker is more efficient and will require less power to produce the same volume as a lower sensitivity speaker.

3. Prepare The Area

Now that you have your speakers, it’s time to prepare the trunk for installation. Start by removing any items that might be in the way, such as floor mats or spare tires.

Then, use a panel removal tool to take off any trim pieces that might get in the way of your work.

4. Cut The Holes

Use a drill and 3/4″ hole saw or spade bit to create openings for your speakers. If you’re using a hole saw, be careful not to damage any surrounding surfaces.

If you’re using a spade bit, be sure to make the opening slightly larger than the speaker so that it has a snug fit.

Use a jigsaw to cut any necessary openings in the trunk for wiring.

5. Install The Speakers

Now it’s time to install the speakers! Start by stripping the wire about 1″ from the end. Then, twist the wires together and use electrical tape to secure them.

Feed the wire through the hole you cut in Step 4 and connect it to the terminals on the back of the speaker. Make sure not to over-tighten the screws, as this can damage the speaker.

Once all four wires are connected, use rags or old towels to block off any openings around the speaker. This will help to prevent water damage.

6. Install The Grilles (Optional)

If your speakers come with grilles, now is the time to install them. Simply line up the grille with the speaker and screw it in place.

7. Test It Out!

Now that your new speakers are installed, it’s time to test them out! Turn on your car stereo and crank up the volume. If everything sounds good, you’re all set!

Benefits Of Installing Speakers In Car Trunks

Here are some benefits of installing speakers in your car trunk:

  • Increased sound quality: Speakers installed in the trunk will provide improved sound quality over those installed in the door. This is because the trunk provides a more enclosed space, which helps to contain the sound.
  • Improved bass response: The trunk is also a great place to install subwoofers. This is because the added space allows for a better bass response.
  • Greater flexibility: When you install speakers in the trunk, you have more flexibility when it comes to speaker placement. This can be helpful if you’re looking to achieve a specific sound profile.

Things To Keep In Mind When Installing Speakers In Car Trunks

There are a few things to keep in mind when installing speakers in your car trunk:

  • Make sure you have the proper tools, you’ll need a drill, 3/4″ hole saw or spade bit, jigsaw, and screwdriver.
  • Make sure to measure the space before buying speakers, this will ensure that you get the right size speakers for your car.
  • Be careful when cutting holes, you don’t want to damage any surrounding surfaces.
  • Use rags or old towels to block off any openings around the speaker, this will help to prevent water damage.
  • Follow the instructions that come with your speakers, this will ensure that you install them correctly.
  • If you follow these tips, you’ll be able to successfully install speakers in your car trunk!

Most Common Mistakes

Here are the most common mistakes people make when installing speakers in car trunks:

Not Measuring The Space

This is the most common mistake people make. Be sure to measure the space before buying speakers so that you get the right size for your car.

Forgetting To Block Off Openings

Be sure to use rags or old towels to block off any openings around the speaker. This will help to prevent water damage.

Not Following Instructions

Be sure to follow the instructions that come with your speakers. This will ensure that you install them correctly.

Not Having The Proper Tools

You’ll need a drill, 3/4″ hole saw or spade bit, jigsaw, and screwdriver. If you don’t have these tools, you won’t be able to install speakers in your car trunk.

Forget To Install The Grilles

If your speakers come with grilles, be sure to install them. This will help to protect your speakers from damage.

Safety Tips When Installing Speakers in Car Trunks

Here are some safety tips to keep in mind when installing speakers in your car trunk:

Wear Safety Glasses

When using power tools, it’s important to wear safety glasses to protect your eyes from debris.

Drill Slowly

When drilling holes for your speakers, be sure to drill slowly. This will help to prevent damage to the surrounding surfaces.

Use A Jigsaw With Care

When cutting holes for your speakers, be sure to use a jigsaw with care. This will help to prevent damage to the surrounding surfaces.

Be Careful With Wires

When connecting the wires to the back of the speaker, be sure not to over-tighten the screws. This can damage the speaker.

Test Your Speakers Before Driving

Before driving your car, be sure to test your speakers to make sure they’re working properly. This will help to prevent any accidents.

By following these tips, you can install speakers in your car trunk safely and successfully!

Conclusion

Installing speakers in your car’s trunk can be a great way to improve the sound quality of your music. By following these simple steps, you can have your new speakers up and running in no time.

I hope you enjoy the method on how to install speakers in car trunk and the improved sound quality and increased listening pleasure that comes with having well-placed speakers in your car.

FAQs

What Are The Challenges Of Installing Car Speakers In The Trunk? 

There are a few challenges that come with installing car speakers in the trunk.

  • First, you’ll need to make sure you have the proper tools.
  • Second, you’ll need to measure the space before buying speakers.
  • Third, be careful when cutting holes for the speakers.
  • Finally, follow the instructions that come with your speakers.

How Do I Know What Size Speakers To Buy For My Car? 

The best way to know what size speakers to buy for your car is to measure the space before buying speakers. This will ensure that you get the right size for your car.

Interested In 10 Best 6×9 Speakers For Bass Without Amp

Can Anyone Install Car Speakers In The Trunk, Or Do You Need Special Tools Or Knowledge? 

You’ll need a drill, 3/4″ hole saw or spade bit, jigsaw, and screwdriver. If you don’t have these tools, you won’t be able to install speakers in your car trunk.

Additionally, it’s important to follow the instructions that come with your speakers. This will ensure that you install them correctly.

Leave a Comment